It will be brutal. It will be vicious.
Gears will grind and sparks will fly, much more is at stake as the robots battle it out in a bid to be the best. These messengers of destruction will duel for honour and denomination with pneumatic pincers, weedy axes, chain saw tails, hurling maces, flamethrowers and loads more.

Get ready to feel the chills and shivers down your spine.
Get ready to listen to the deafening alarm of annihilation.
Get ready to be a part of Robowars.

Dimension and Fabrication

1.    Size of the robotic car/machine should be 450mm x 250mm x 250mm.

2.    The machine should not exceed 10 kg of weight. Weight of remote controller will not be counted.

3.    Self fabricated shock absorbers can be used.

4.    Chasis available in the markets are not allowed. Self abricated chasis are only allowed.

Mobility

All robots must have easily visible and controlled mobility in order to compete. Methods of mobility include: 

1.    Rolling (wheels, tracks or the whole robot).

Robot Control Requirements

1.    The machine can be controlled through wireless remote only. Power supply should be on board only. There should be binding capability between transmitters and receivers. The remotes with such facility will only be allowed.

2.    Remote control systems from toys might be used. Remote control systems available in the market may also be used.

3.    Nonstandard or self-made remote control systems must first be approved by the organizers.

4.    Team should pair up the wireless remote with the machine before putting it into the arena.

Battery and Power

1.    The machine can be powered electrically only. Use of an IC engine in any form is not allowed. On board batteries must be sealed, immobilized-electrolyte types (such as gel cells, lithium, NiCad, NiMH, or dry cells).

2.    The electric voltage between 2 points anywhere in the machine should not be more than 24V DC at any point of time.

3.    All efforts must be made to protect battery terminals from a direct short and causing a battery fire, failure to do so will cause direct disqualification.

4.    Use of damaged, non-leak proof batteries may lead to disqualification.

5.    Special care should be taken to protect the on-board batteries. If judges found that the battery is not properly protected, then team will be disqualified immediately.

6.    Change of battery will not be allowed during the match.

7.    Only bots with onboard batteries are allowed.

8.    It is suggested to have extra battery ready and charged up during competition so that on advancing to next level, you don’t have to suffer due to uncharged battery. If teams don’t show up on allotted slot, they will be disqualified.

9.    Hydraulics and pneumatics sources to power the robot are not allowed.

Problem Statement

1.    To fabricate a robotic car with the above mentioned size constraints and weight in order to complete the race in the minimum time.

2.    The race will include two laps of the track.

3.    Hurdles will be there on the track like slopes, sand heaps, mud, iron hurdles and much more. All details about the hurdles will be disclosed at the time of race.

4.    Slopes on the track will not be more than 20 degrees.

5.    Opponents will be allowed for a wild run i.e. one can hit the other opponent in order to win the race.

6.    If once immobilized, the participant will be disqualified from the race and the car/machine will remain on the track until the race end.

Registration fees : Rs. 1000
Venue : Ground
Prizes : Robowar Rs. 4000    Roborace Rs. 2000
Timing : 10:00 am to 11:30 am
Coordinator :   Sakshi             Abhishek
          +91- 9068049140   +91- 9671356324